SCHEMATIC DIAGRAM FIRST CLASS FC-A4500

FIRST CLASS FC-A4500 is a Power Amplifier say 2 x 1500 Watts and it’s so famous in Indonesian.

Inside the box, the secondary voltage of Power transformer is 64VCT, and this could be 85 to 91 Volt DC symmetrically voltage.

In that number of voltages, will be possible to make audio output up to 650 Watts at 4 Ohm load.

First Class FC-A4500 use Four pieces of Elco with value 10.000uF/100V. This is important component to DC filter.

Where is to purchase the unit? The answer is it can be your own after bought from online shop list below (price between Rp 2M to Rp.3M):

Also list below are online shop with price between Rp.3M to Rp.4M:

TRACED SCHEMATIC DIAGRAM FIRST CLASS FC-A4500

To making schematic diagram that came from this Power Amplifier kit has took about 2-3 hours to observation.

Result of power amplifier tracing is shown below:

result of traced drawing of First Class FC-A4500

Note: the result may be wrong.The schematic diagram is come from visual observation of youtube video I saw.

The amplifier is designed in symmetrical circuit. It can be seen at the image schematic on above.

From the schematic below, the amplifier section is consisting of some circuit blocks:

  • The First is Differential preamplifier,
  • Voltage Amplifier Stages,
  • Servo Driver,
  • Driver Amplifier, and finally is
  • Final Power Amplifier.

FIRST CLASS FC-A4500 Power Amplifier is using 3 pairs of Final Transistor as 2SC5200 / 2SA1943 or 150 Watts in power dissipation (DATASHEETS).

Its mean that the Amplifier are possible to made out of 900 Watts of total Power Dissipation or about totals 750 Watts Effective power.

SEE ALSO

Other schematic Power Amplifier inside this blog THIS LINK.

Blogspot Yohan’s Blogspot consist of many DIY power and audio built up READ THIS.

Various Built-up Power Amplifier and Mixer at THIS LINK.

VIDEO SOURCE:

FIRST CLASS OFFICIAL YOUTUBE